Industrial Electric Heater

Product Details:

Electricfor manufactures several different types of duct heaters for a multitude of applications.  We offer self-contained designs that carry 3rd party listings and component type designs typically used for OEM drying and heating processes.  If you can't find the exact design you're looking for, our application engineering group can work with you to develop a custom configuration.

Price Range:

• 5 Lakh to 10 Lakh

Capacity Range: 0.5 kw to 3000 kw 

• 10Kw to 1000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

An in line Electric heater is composed of an immersion heater covered by an anti-corrosion metallic vessel chamber. This casing is mainly used for insulation to prevent heat loss in the circulation system. Heat loss is not only inefficient in terms of energy usage but it would also cause unnecessary operation expenses. A pump unit is used to transport the inlet fluid into the circulation system. The fluid is then circulated and reheated in a closed loop circuit around the immersion heater continuously until the desired temperature (up to 1000 degreeF) is reached. The heating medium will then flow out of the outlet nozzle at a fixed flow rate determined by the temperature control mechanism.

Tools such as the RTDs and digital thermocouples can be used to precisely control the temperature of the heating system. For extra protection, optional components such as moisture resistant or explosion proof housing are available for special applications. Drain valves are also available on the circulation heater to facilitate the procedure with the system maintenance, whereas the leftover fluid or residues (such as water or Calcium) can be easily removed from the equipment. Special mounting options are available for the target application's mobility requirement. The flange immersion heater inside the circulation unit can be customized by Electricfor manufacturing depending on the chemical and physical properties of the target fluid. Other customization options, such as the equipment orientation (vertical or horizontal) or flange type, are also available to consider for your target application.

There is a large variety of immersion heaters available in the market which can even be tailored to meet specific needs of an oil plant. The offered products can be used in a variety of applications that feature high pressure ranges or are executed in hazardous regions. Generally, whenever an immersion heater is used for heating, it is usually immersed in the solution which has to be heated. As such, the heating elements are often covered by a sheath so that they remain protected.

Inline heaters comprise of heating elements that are mounted in a rounded tube. Often, the flanged heater is thermally insulated by either the side or inline operation so that the efficiency of the heating process can be increased. This is particularly done when a flowing medium has to be heated. Almost all inline heaters use  thermocouple sensors that can be integrated with any control to manage the temperature range. Different applications call for varying options for terminal enclosure, sheath material, flanged connections, and temperature ranges. Several mounting options are also available such as integral mounting utilizing SCRs and remote mounting which uses contactor control panels.

A vessel heater is manufactured as a packaged unit which contains several components such as heating element, chamber, thermostat, sensors, insulated material, brackets for mounting and electrical connections. The efficiency of this heater is high as all heat is produced within the substance or vessel. The operation is fast and executed in a short time. The heat generated is evenly distributed throughout the substance.

Many applications make use of indusrial heaters. The most common of these are heating oils, corrosive solutions, water cooled engines, oil sump heaters, process kettles, blending mills, molding dies, steam superheating and preheating purposes such as viscosity pumping and oil delivery to burners.

Price Range:

• 5000 to 10 Lakh

Capacity Range:

• 0.5Kw to 1000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Electricfor can meet your needs across a wide range of variables for pipe thread heaters ranging from 1" to 3" NPT and BSP. You can order from stock, or customize for your specific application and utilize our FastTack program for most designs. Features of Electricfor screw plug immersion heaters 

Price Range:

• 2 Lakh to 10 Lakh

Capacity Range:

• 0.5 Kw to 500 Kw

Other Details:

• As all heat is generated inside of fluid, it's possible to reach the maximum energetic efficiency. In the absence of distorting elements, control the process temperature can be very tight.
• The immersion heaters can have many different types of coupling to the tank where are installed: through plug, with "nipples", with flange, submerged heaters, etc. It's possible to use electric heating elements to heat any kind of fluid, from water to corrosive solutions, oils, highly viscous fuel oils, steam, etc. We may also use immersion heaters for work in hazardous areas and flameproof (ATEX), or process industry with working pressures above 40 bar. Apart from the extensive stock of Electricfor, we can manufacture any kind of heater to suit the needs of the plant.
• Electricfor has a huge variety of immersion heating elements, available in stock for immediate delivery.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid medium.
A thermowell is often used within the bundle of elements to allow for a probe (either a thermocouple, RTD or basic mechanical thermostat) to relay temperature readings to a digital control panel that cycles and maintains the desired target temperature. Often a high limit sensor is also used to help protect liquid mediums from over heating and, offers protection to the flange heater as well

Price Range:

• 5000 to 10 Lakh

Capacity Range:

• 1Kw to 1000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Electricfor (preheaters) are used to heat fuel oil to a desired temperature before combusted in a boiler. They are called preheaters because they are used to preheat the oil. Maintaining oil temperature is necessary to ensure that complete combustion occurs under optimal conditions, thereby reducing pollutants and increasing efficiency.

Our electric fuel oil heaters (preheaters) can be provided in a flange or screw plug design. Thermostats are provided with or without interlocks. Our fuel oil heaters use interlocks to prevent the oil pump from pumping cold, thick oil into the furnace until the oil has been preheated to the required temperature.

Price Range:

• 10000 to 25 Lakh

Capacity Range:

• 10Kw to 1000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Electricfor circulation heaters are packaged units consisting of a screwplug or flanged immersion heater mounted in a thermally insulated heating chamber for efficient heating of a flowing medium by in-line or side-arm operation. Thermocouple sensors can be provided to connect to most any controller. Select from many terminal enclosures, sheath and vessel materials, flanged connections, and controls. Many models can be desinged according to the application.

Applications include: Water Heating, Freeze Protection, Heat Transfer Oil Heating, Fuel Oil Heating, Steam, Air, and Gas Heating and others.

Consult your local Electricfor Sales office for more detailed information on many special features, larger kilowatt heaters and skid mounted circulation heater systems.

Electricfor offers the broadest selection of stocked Immersion Heaters in the industry. Industrial immersion heaters are designed for direct contact heating of water, oils, viscous materials, solvents, process solutions and gases for many industrial heat applications. Since all heat is generated within the liquid or process, virtually 100% energy efficiency is achieved. Various temperature control options permit very tight process temperature control. Basic mounting options of threaded screwplug connections, flanges, or simple over-the-side designs facilitate customer installation. A large selection of designs is available from stock for immediate delivery. Products are available for heating any fluid; from plain water to corrosive solutions, highly viscous oils, and for many specialized applications such as high pressure and hazardous areas. Custom engineered designs are also routinely manufactured by Electricfor.

Electricfor electric immersion heaters apply heat directly at virtually 100 percent efficiency. Basic piping options include threaded, flanged, or welded. Various temperature control options permit very tight process temperature control. Chromalox manufactures a large selection of electric immersion heaters for heating any fluid, from plain water to corrosive solutions, highly viscous oils, and for many specialized applications such as high-pressure and hazardous locations.

Price Range:

• 5 Lakh to 25 Lakh

Capacity Range:

• 10 Kw to 3000 Kw

Product Details:

Electricfor manufactures several different types of duct heaters for a multitude of applications.  We offer self-contained designs that carry 3rd party listings and component type designs typically used for OEM drying and heating processes.  If you can't find the exact design you're looking for, our application engineering group can work with you to develop a custom configuration.
Price Range: 

• 5 Lakh to 25 Lakh

Capacity Range:

• 10Kw to 1000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Electricfor Screw Plug Heaters consist of tubular elements that are brazed or welded to a screw plug and provided with Terminal Enclosures suited for your application.

Screw Plug Heaters are screwed directly into a tank wall or through a matching pipe coupling.

Screw Plug sizes up to 4 " NPT and BSP  in Brass, Bronze, Carbon, and Stainless Steels are available. 



Price Range:

• 5000 to 2 Lakh

Capacity Range:

• 0.5Kw to 3Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of Electric Process Heaters.

Price Range:

• 5 Lakh to 25 Lakh

Capacity Range:

• 10Kw to 3000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Electric Tank Heaters are necessary for accurate control of liquid and gas temperatures in a variety of uses, including storage tanks, railroad tanks, and smaller tanks and basins. Electricfor has been designing and manufacturing for a wide assortment of industrial, marine and commercial uses. We have a wide variety of electric heaters that can be adapted to your needs, from heating small basins to railroad tank cars.

Price Range:

• 10 Lakh to 50 Lakh

Capacity Range:

• 10Kw to 1000Kw

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)